Reduced by $5,000 this week for quick sale! You snooze you loose. Machine comes with all the tooling depicted, worth a few thousand dollars! Machine can be inspected under power. Specifications as per manufacturer's booklet to be used as a guideline only Stone Capacity: Face Polishing: 26"x102" (Maximum Length) 36"x72" (Maximum Width) Machine Specifications: Weight: 2700 Lbs. Height: 73.875 inches Handle Assembly Height: 43 inches Radial Arm Length: 78.5 inches Minimum Working Radius: 34 inches Maximum Working Radius: 78.5 inches Main Spindle: Drive Motor: 5 HP Belt Drive Spindle RPM: Variable, 400 to 3500 RPM Spindle Pressure: Variable, 0 to 100 PSI with Precision Regulator Center Water Feed Pneumatic R&F with adjustable hard stops, 6 inches of travel Auxiliary Spindle: Drive Motor: 3 HP Direct Drive Spindle RPM: Variable, 1750 to 10000 RPM Center Water Feed Manual Screw Rise and Fall, 6 inches of travel Controls: Variable Spindle Speed Control with Digital Speed Display Variable Spindle Pressure Control with Analog Display Gauge Rise and Fall Selector Switch Emergency Stop Requirements: Power: 240 Volt, 60 Hz, 3-Phase with 30 Amp main Disconnect (standard) Air: 100 PSI at 2 CFM, 3/8 inch hose Water: 5 GPM clean water (filtered to 20 micron or better), 1/2 inch hose Mounting Base: 36"x36" slab, min. 4" thick. (Recommend 8")
|