30HP , 50000 PSI X-Y table with Motorized Z-Axis. ? Rapid water level control for submerged cutting ? Single OMAX MAXJET® 5 Nozzle Assembly including all necessary high-pressure plumbing. ? OMAX patented motion control system incorporating Windows® XP software. ? 600 lb. abrasive hopper. ? Black anodized aluminum covers for X-Axis components. ? Ultra-high pressure direct drive pump. ? Table cutting length expandable by two meter increments. ? Traction drive coupled with position feedback from a linear scale results in high precision. Machine Dimensions Footprint 243" x 134" (6170 mm x 3405 mm) Footprint with optional SRS 288" x 134" (7315 mm x 3405 mm) Expandable length 2 m increments Weight (tank empty) 10,000 lbs (4500 kg) Height 144" (3660 mm) Operating Weight 35,000 lbs (15900 kg) Work Envelope (Standard configuration)(See Table A for Extension Kits) Y Travel 80" (2032 mm) X Travel 168" (4267 mm) Expandable Contact local Distributor for details Table Size 174" x 91" (4419 mm x 2311 mm) Material Support Slats 4" x 1/8" Galvanized Steel Maximum Supported Material Load 250 lbs/sq. ft. (1,200 kg/sq. meter) (Optional accessories may reduce travel. Contact OMAX for information.) Computer Control System Hardware Personal computer Control Software Integrated CAD/CAM system directly uses .DXF files Drive Description ? Closed loop, digital drives ? Brushless servo motors ? Pre-loaded ballscrews with recirculating ball bearings and hardened precision ground ways in Y-Axis Accuracy of Motion at 70° F Ball Bar Circularity (Over 12?) At Cutting Speed ±0.005" (±0.13 mm) Repeatability ±0.005" (±0.13 mm) Speed ? 180 inches per minute standard (Speed can be increased if desired.) Electrical Requirements ? 3-Phase, 380-480 VAC ±10%, 50-60 Hz (Note: Contact OMAX for detailed utility requirements. Pumps are built to meet UL and CE specifications.) Descriptions were taken from manufacturer's web site of a 2012 model and cannot be guaranteed for this 2007 model.
|