2000 PARK INDUSTRIES JAGUAR C4000 BRIDGE SAW DESCRIPTION AND SPECIFICATIONS WERE TAKEN FROM THE MANUFACTURER'S WEB SITE AND CANNOT BE GURANTEED FOR THIS 2000 MODEL. Main motor size: 30 HP AC across the line soft starter, TEFC Motor Main drive system: Belt drive 40î Max. blade diameter Arbor: Heavy duty spiral bevel gearbox with tapered roller bearings Track type wire/hose distribution system for cross head travel Cross head travel distance: 139" travel Cross head travel drive: Rack and pinion Cross head travel speed: 1-40 FPM, variable speed AC drive, TEFC motor Cross head travel guides: Dual round linear ways with double-length precision slide bearings, top and bottom Raise and lower: 18" Raise and lower drive: variable speed machine screw with brake for precision positioning 0-120 IPM (0-90, JAGUAR 4000) Removable blade cover Gantry: 192" long rails, 10'-8" cutting area, gantry drive speed: 1-40 FPM, flanged steel wheels on both sides, automatic air brakes Machine Requirements: Electrical power at machine: 480 volt (-15/+10%), 3 phase, 60 Hz Air supply at machine: 3 SCFM volume, 100 PSI pressure, free of oil, water and grit larger than 25 micron (3/8" I.D. air line) Water supply at machine: 3-14 GPM at 50 PSI (see blade supplier) (3/4" I.D. water line) Machine Capabilities: Maximum sawing depth: 15" with 40" blade Blade Specifications: Blade housing built to accept 40" blade (maximum) Blade center hole to fit a 50 mm arbor shaft Blade mounted on left side of bridge as viewed by operator Blade flange size: 8" Maximum tool width: 1-1/2" Installed dimensions: 20'-5" long x 20'-11" wide x 12'-2" high Weight: 7,800 lbs JAGUAR 4000 Control: Straight-line profiling Programmable for automatic operation Remote dial-up serviceability Automatic step cut with final pass Digital input of variable next cut locations with kerf adder Color touch screen for all powered movements and data input Hard drive for profile storage Internet connection USB flash Drive CD ROM Drive Ability to input profile while machine is in operation Ability to accept DXF data input On-screen shape viewing Main motor amp meter with over amp Amp following Water flow safety Water control solenoid Hour meter with clock Laser light Hand held pendant for directional control of cross head travel, raise and lower movement and gantry positioning (includes E-stop) English or metric data input capability
|