Gantry Movement Driven by two brushless servo motors coupled to low backlash gear drive systems Speed range: 0-600" per minute Guided by heavy duty hardened rollers riding on a round way and a flat rail Length of movement: 6'6" Traverse Movement Driven by a brushless servo motor coupled to a low backlash gear drive system Speed range: 0-600" per minute Guided by dual slides on hardened round ways Length of movement: 11'6" Blade Pivot Movement Driven by a brushless servo motor coupled to a low backlash gear drive system with 360 degree rotation V Work Table 10' long x 5' wide x 2' high unless larger work table option is purchased 6" honed granite with steel support structure Water collection channel Stone Clamping System Vacuum system complete with 3-way slide valves, coil hose, and fittings 12 vacuum cups (includes coiled air hoses): four 8" single chamber cups, four 6" single chamber cups, and four 4-1/2" single chamber cups 8 vacuum fences (includes coiled air hoses) Convenient cup storage Machine Weight and Dimensions Weight: 12,000 lbs. Floor Space Requirements: 22'-3" long x 15'-6" wide x 7' high Machine Requirements Electrical power at machine: 208 volt (+/-10%), 3 phase, 60 Hz, 90 amps required Modem connection at machine: One analog phone line available Air Specifications: Line size: 3/8" I.D.; Pressure: 100 PSI; Volume: 16 SCFM (continuous); Dirt(max): 15 micron; Water (max): +37.4 Pressure dew point (deg. F) @ 100 PSI g; Oil (max): .01 mg/m3 Water supply at machine connection point (dual water feed or single water feed): Dual water feed (two 3/8" I.D. water lines minimum): 5 GPM, 45 PSI, filtered to 5 micron (spindle center water feed) 5 GPM, 45 PSI, filtered to 50 micron (blade and water ring), or Single water feed (one 1/2" I.D. water line minimum) 10 GPM, 45 PSI, filtered to 5 micron BT40 (ISO40) 35 mm bore shape tool holders, 2 cm to 3 cm stone only Specifications are generic for a Odyssey II model and might differ for this machine.
|