ISIMAR/BREMOR EASY CONTOUR with (1) 118" (3,000 mm) x 63" (1,600 mm) Moving table. ≈≈ Smooth aluminum table surface with vacuum pins and pod system machined with positioning holes for positing pin location. ≈≈ Extra Heavy Duty fixed gantry bridge, X-axis travel = 133.86" (3,400 mm) (table front to back), Y-axis = 55.12" (1,400 mm) ( head along bridge), Z-axis = 13.78" (350 mm) . ≈≈ Equipped with: (1) 5.5 kW (7.5 HP) Electrospindle ISO 40 ATC with RH/LH programmable rotation, spindle speed of 1,000 - 10,000 RPM, (17) tool rack type holder, spindle powered by (1) 8 KVA static frequency converter; ≈≈ Closed loop AC Servo drive system with precision ground stainless steel ball screws for positioning, fast 1,378 IPM (35 MPM) positioning feed rate on X-axis; 1,378 IPM (35 MPM) on Y-axis, 590" IPM (15 MPM) all axes ride on extra large precision contour linear guideways. ≈≈ OSAI "10" WINMEDIA Series control system, featuring: (8) Axes simultaneous control, ETHERNET connection, large hard drives, inch/metric operation, and feed rate & spindle speed override (monitor and controls). ≈≈ Complete with: Automatic centralized lubrication system with forced grease injection, (17) ISO 40 tool holders with collets, (1) 4 kW (5 HP) DVP dry-vane vacuum pump, (4) 7.87" 200 mm and (4) 3.94" (100 mm) double suction vacuum pods (5) 150mmx150mm vacuum pods (8) 200mmx 200mm vacuum pods Large assortment of tooling (list upon request) The spindle is a Saccardo spindle Foot print 25' x 14' Weight approx. 15,000 Lbs Service & Support through CMS/Brembana in Caledonia Michigan
|