�Shengda # XZQQ-625 Stone cutting saw 20 HP Saw motor blade dia: 625mm or 24" 0-45 deg tilt blade blade 80" x 126" wood table 190" total width between housings head travel in /out on side rails:140" RPM: 2085 tilting table wired 220/3 currently factory specs below: Bridge cutting machine: XZQQ-625 Max.working dimensions(LxWxH) Mm 3200x3200x200 Max.diameter of blade Mm 625 Table dimensions(LxW) Mm 3200x2000 Table tilting degree No 0-85 Table rotating degeree No 360 Head tilting degree no 0-45 Main motor power Kw 15 Overall dimensions(LxWxH) mm 6000x5000x2600 This machine is PLC controlled with cutting dimensions set by terminal input. All operations are executed either manually by the operator or automatically by the program carrying out parallel cuts with max 8 different dimensions repeatable up to 1999 times. The switchboard, with operation buttons, programmer and liquid crystal display on it, is mounted on the right hand side of the machine. The switchboard make operator easily to control the machine from the sawing area when the stone is being positioned. The saw is equipped with a laser illumination system to aid in lining up the cut. The most important is the blade holder of machine can be tilting from 0 to 45 degree for chamfering cutting. So the machine can be satisfy for different special processing request. The cut is controlled through an inverter.
|