|
Machine must move. Comes with all the extra spare spindles and tooling as pictured. Machine is stored outside underneath an industrial tarp. Control panel is stored inside. Machine was in working condition when removed from service. Additional pictures upon request. The Montresor Lara 60-S2, an automatic edge polisher that has been specifically designed to meet the needs of companies looking for high production of straight, slanted and bullnosed edges up to 60 mm in thickness. The machine has a very sturdy steel structure that has been fully machined, sandblasted and then given an epoxy-based undercoat and enamel paint. Six mobile frontal heads programmed by accurate and synchronized mechanical transmission enable the Lara 60-S2 to produce all types of profiles, reports its manufacturer. The machine can process bullnose profiles between 15 and 60 mm in thickness, which are obtained by the use of standard plane diamond wheels and do not require the use of profiled tools. The engagement and disengagement of the abrasive on the edge to be polished can be programmed even in the presence of irregular work pieces, and polishing of straight edges has been improved by the introduction of gentle rocking movement of the heads (plus or minus 2 degrees). With the use of a special diamond tool, a light bushhammering type finish can be obtained on straight or bullnose edges up to a maximum thickness of 60 mm. The frontal bar is no longer required, and the forward and reverse pressure controlling the abrasives is independent and does not require counter pressure. The conveyor belt slides over an interchangeable wear-resistant stainless steel surface and is fitted with a square cross-section guide way recessed into the work surface near the pressure units, thereby avoiding belt displacement during processing operations. Above description was taken from "Stoneworld's web site archives and are subject to verification.
|
Air Compressors
Block Stone Profiling Machinery
Machines
