2003 Park Industries Odyssey II CNC Stone Center
Machine was only used to do sink cut outs.
Machine has sawing head attachment on spindle and is fully functional.
Large Inventory of all popular sinks already saved in computer for new owner.
Making room for new machine and selling at low price to get the machine to a new home and out of the way.
Machine is under power and available for inspection.
Specs to be verified by buyer:
Machine has approx 7500 hours on it.
12 pods and 6 cones limited tooling
Machine Weight and Dimensions
Weight: 12,000 lbs.
Floor Space Requirements: 22'-3" long x 15'-6" wide x 7' high
Electrical power at machine: 208 volt (+/-10%), 3 phase, 60 Hz, 90 amps required
Modem connection at machine: One analog phone line available
Air Specifications: Line size: 3/8" I.D.; Pressure: 100 PSI;
Volume: 16 SCFM (continuous)
Dirt(max): 15 micron
Water (max): +37.4 Pressure dew point (deg. F) @ 100 PSI g
Oil (max): .01 mg/m3 Water supply at machine connection point (dual water feed or single water feed):
Dual water feed (two 3/8" I.D. water lines minimum):
5 GPM, 45 PSI, filtered to 5 micron (spindle center water feed) 5 GPM, 45 PSI, filtered to 50 micron (blade and water ring), or
Single water feed (one 1/2" I.D. water line minimum) 10 GPM, 45 PSI, filtered to 5 micron
BT40 (ISO40) 35 mm bore shape tool holders, 2 cm to 3 cm stone only
Machine will be sold as is / where is and implies no warranties.
Buyer responsible for shipping, rigging and installation.
Subject to prior sale.