HP spindle motor 10 HP RPM range 6000 RPM Machining capacity X axis 130" Y axis 72" Z axis Vertical, z-axis travel 15" travel with 12.75" clearance below frame Production rate edge shaping/polishing router at 7"/min. for 3cm granites and forming to polish from 15"/min to 35"/min. dependent on tooling How many spindle hours second spindle on machine has approx.. 10k hrs. How many tool changers no auto changer change tools by hand How many vacuum pods twelve assorted sizes How many tool sets with the machine no complete sets some loose tools and set of 10 holders Condition Structually very sound, operational needs some minor cosmetics, some rust at base of electrical enclosures. What software with the machine, any upgrades Edge cam. Machine was upgraded, which included complete controller and servo motor replacement in 2003 at a cost of over $20,000. Water consumption gallons 3gal/min. filtered recycle water. Machine will still be under power until end of August 2014 Buyer is responsible for dismantling, and removal from building. Inspect under power in operation.
|