Here are the particulars on the quarry wire saw. This is truly a turn key setup, Machine has less than 3 hours on it, ( Has digital hour meter ) I basically purchased the wrong machine for my application or you could say that a stationary wire saw works much better for what we do.
I have the operators manual. There is no difference between this saw and a Marrini/ Dazinni. It has 100 % same functions and all parts can be found here in the USA. So if anyone is afraid of the foreign saw, there is no need to be.
2015 Stone Diamond Wire Saw
PLC computer is Siemens and all other electrical components are either Siemens or Schneider
I will include 60' of brand new wire and a new Hydraulic Crimper needed to connect the wire.Also have a new set of idler pulleys with mounting brackets.
Main motor power 15KW/20HP
Cutting head rotation 360°(by hand or motor
Linear wire speed 0~40m/s
Machine Travelling speed 0~60m/h
Working condition -15°C~+40°C Humidity < 95%(without dew)
Machine comes with 3 sections of 4' track and a track for idler pulleys
Machine is wired for 230 Volt 3 phase- Has complete digital readout display of all controlls of saw including any saftey faults.
The wire tension and cutting current is closed loop automatic controlled by PLC and inverter.
The cutting process can be automatic and controlled accurately.
The movement and rotation of the cutting head is driven by motor with position Limitation Protection.
Machine protection functions including:wire broken,Machine overload,cutting finished.