|
Seller will sell this machine with a function guarantee, backed by a $2,500 holdback for the unlikely case that repairs would be needed. Seller would have to pay any repairs up to $2,500 out of this holdback. Machine is still under power. Must be moved before the end of February! For a video of such a machine and descriptions please go to: http://www.parkindustries.com/content/view/26/27/ (copy and paste web link into your browser address field) Specifications and features are taken from the manufacturer's web site and are to be used as a guide only and cannot be guaranteed for this 2006 model. Machine is currently still under power, but no operators available. Features & Benefits Pre-programmed profiles for a variety of shapes Top and bottom chamfer of flat edges at 45 degrees to 1/8" Piece length: 2' to 12' Piece width: 7" to 4' without support conveyor / 4' to 12' with support conveyor Nineteen 2" bore X 4" stroke heavy-duty triple rod air cylinders with non-marring urethane rollers Easy-to-use color touch-screen controlsSingle-pass performance Fast and simple setup Space & Weight: Weight: 16,000 lbs. Overall dimensions: 31' 2" long x 8' 9" wide x 7' 10" high (including input, output and swing-out conveyors) Spindles: One back gauging spindle: 6.5 HP at 3450 RPM Two pre-grinding spindles for waste material removal: 6.5 HP at 3450 RPM One servo-driven shaping spindle: 6.5 HP at 3450 RPM Six polishing spindles: 2 HP at 1710 RPM Two chamfer spindles: 2 HP at 1710 RPM Center water feed on all spindles except servo shaping spindle Internal air purge on all spindles to prevent bearing and seal contamination Tool adapters for 6" tools on all polishing spindles Pneumatic Hold-Downs: Nineteen 2" bore x 4" stroke heavy-duty triple rod air cylinders with non-marring urethane rollers in stainless steel yokes Built-in skew to minimize stone shifting Powered Belt Conveyor Drive: 2' wide x 17' long non-slip, non-marring conveyer belt 1 HP duty AC motor with variable-frequency drive speed control (2" to 40" per minute) Input/Output Conveyors: Input conveyer: 72" long x 31" wide with “all way” rollers and non-marring guide fence Output conveyer: 72" long x 31" wide with “all way” rollers Swing-out support conveyer: provides overhanging stone support from 9" to 36" from outside edge of conveyer belt Construction: Frame: heavy-duty structural steel/plate construction, stress relieved and precision machined Spindle bridge: rigid torsion box design, stress relieved and precision machined Capabilities: Edge Types: Pre-programmed profiles, including flat edge, flat edge with radius top and bottom, bullnose, half-bullnose, and other convex shapes for 2 cm (3/4") to 6 cm (2-3/8") stone Top and bottom chamfer of flat edges at 45 degrees to 1/8" Stone Capacity: Piece length: 2' to 12' Piece thickness: 2 cm to 6 cm (3/4" to 2-3/8"); 6 cm with diamond tooling only Minimum 8" spacing between work pieces Control System: Color touch-screen Operator-programmed parameters include but are not limited to: pre-programmed profile configurations for varying stone thicknesses, conveyer speed, spindle motor selection, spindle stagger, hold-down timing, on/off functions, pause process/restart, production data management, user-friendly help screens, on-screen diagnostics, maintenance schedule management, and setup screens
|
Air Compressors
Block Stone Profiling Machinery
Machines
