|
10 HP motor 12'8' x 7' 3' table size Head tilt for 45 and 90 degrees Overall dimensions are 14'2" long x 7'8" wide x 7'2" high Weight approx. 3,500 Lbs Specifications below are from the Italian manufacturer's web site and should only be used as a guideline. Total power installed 9,00 kW (12HP) Main motor (standard) Three-phase Power 7,5 kW (10HP) Voltage 400 V~ Frequency 50 Hz Rotation speed 1400 RPM Main motor (optional) Three-phase Power 11 kW (15HP) Voltage available upon request Frequency available upon request Rotation speed 1400 RPM (at 50 Hz) Head and bridge feed motors Three-phase Power 0,37 kW (0,5HP) Voltage 230 V~ Frequency 50 Hz Variable speed by inverter from 0 to 7 m/min (0 to 23 ft/min) (forward and reverse) Raise and lower motor Three-phase Power 0,18 kW (0,24HP) Voltage 230 V~ Frequency 50 Hz Variable speed by inverter from 0 to 0,4 m/min (0 to 1,3 ft/min) MAIN ELECTRIC PANEL: Main isolator switch. Emergency stop push-button. RESET power-on button. MOBILE PANEL: Emergency stop push-button. Main motor start/stop button. X and Y-axis selector. 5 buttons to control forward, stop and reverse of X and Y-axes. 2 variable speed controls for X-axis (head forward-reverse). 2 variable speed controls for Y-axis (bridge forward-reverse). 1 variable speed control for Z-axis (main motor raise-lower). 3 counter RESET buttons for X, Y and Z-axes travel displays. 2 buttons for blade raise / lower. Maximum diamond blade diameter Ψ 500 mm (20) bore 50 mm (2) Blade peripheral speed (50 Hz) 36,6 m/sec (120 ft/sec) Blade periperal speed (60 Hz) 44,5 m/sec (146 ft/sec) Cutting depth with a Ψ 500 mm blade 150 mm (5-7/8 in) Manual head tilt from 90° to 45° Manual main motor rotation with 4 locking positions 0° - 90° - 180° - 270° Net weight of machine without accessories 1555 kg (3428 lb)
|
Air Compressors
Block Stone Profiling Machinery
Machines
