|
Very low usage machine, very clean and well maintained, comes with (6) cardide cutters) (2) Spindles with 10 HP-3,600 RPM motors each, 30 mm spindle x 3" clamping length 9-1/2" max. diameter cutter head 1/4" to 1-1/8" material thickness board width from 6" min. to no max. width restrictions min. board length approx. 20" unlimited length of part when cross grooving end cross grooving up to 14" 6" diameter solid aluminum reference roller in cutting area Grooving heads are mounted in front and back of the heavy duty, precision machined overhead beam of 8" x 12" x 1/2" thick, heat-treated steel head height positioning pneumatically controlled via solenoid valve allow for rapid vertical head positioning when using (2) different cutter profiles head side movement on linear rail & bearings via DC motor with (2) speed settings and adjustable speed within each speed setting, precision machined beam and ACME thread screw via digital readout scale pneumatic lock of head positioning, head height adjustment on linear rail & bearings, manual fine tuning for initial set-up via ACME screw with dial indicator gauge Hydraulic feed unit for variable feed rate from 0 - 40 FPM double width feeder belt moves work piece on high-precision, steel roller conveyor table, raising & lowering of feeder for optimum friction via DC motor and dial indicator readout scale, automatic pneumatic lock of feeder height position. Complete with: Fixed fence, cleaning brush, cutter guard and emergency shut-off line along the machine bed, automatic tape applicator with 14" tape diameter capacity, automatic side movement of tape applicator to automatically align with the cutter head in operation, anti-noise leveling pads. Dust collection requirements 700 CFM (1,400 CFM with both heads in operation), 3" diameter dust chute on cutter guard, compressed air requirements 80 PSI,
|
Air Compressors
Block Stone Profiling Machinery
Machines
