|
SMP 50 Intensifier Pressure Pump 60,000 PSI (4,150 BAR) Max. operating pressure 50 HP (37kw) Power 1 GPM (3.81 L/min) Flow rate .014 in (.36mm) Max. orifice size 50 Gal (189 L) Hydraulic reservoir capacity 3 - 5 GPM (11.4-20 L) Cooling water flow 61 cu. inch (1 L) Standard attenuator volume Dimensions: 51.5" L x 43" W X 46.4" H 1,800 Lbs weight Features: 1 & 10 Micron inlet water filters with outlet pressure gauge Low inlet water pressure safety switch (30 Psi) Return line oil filter with service indicator Electronic shift Electronic pressure control HI-Temp/Low level oil safety switch Oil/Water heat exchanger Auto bleed down valve Sealed base captures oil in case of major spill Rugged power coated finish Epoxy coated oil tank Vibration isolation pads on motor Options: Mechanical shift Mechanical pressure control Air/oil heat exchanger (Oil temp controlled) Cooling water solenoid valve (100F) Remote start/stop, E-stop, Hi/Low 40 KPSI Intensifier Inlet water booster pump 135 cu inch (2 Liters) attenuator
|
Air Compressors
Block Stone Profiling Machinery
Machines
