|
reduced 5k for quick sale 2004 Pro-Edge III 1980 hours very well maintained. hooked up and ready to be inspected. 2/2.5 HP, 1710/3420 RPM Pneumatic head travel with position lock (with pressure gauge and adjustment); stroke length: 2î Center water feed Internal air purge system Tool adapter to accept 100mm snail lock or 5/8-11 NC connections Shape tool adapter Spindle Miter: 0 to 189 degree miter range Hydraulic rack and pinion drive Hardened alloy-steel C-arm with powder-coated finish Rise and Fall: 3î rise and fall travel Round rail precision guide system Manual positioning with pointer/ruler display Cross Travel: Hydraulic, 15-100 FPM variable speed Heavy-duty rack and pinion drive system Cross travel carried on two chrome hardened steel rails with slide bearings, automatically lubricated Table and Clamping: 12íL x 4íW precision-machined tabletop work area with rubber matted surface Pneumatic, pop-up, ìall wayî rollers to assist in positioning, loading and unloading stone (2,500 lbs. total lifting capacity) Five adjustable, pneumatic hold downs with aluminum extension bars Built-in storage for aluminum extension bars Adjustable PARK bench to support long pieces Construction: Table: Heavy-duty structural steel/plate construction, stress relieved and precision machined Bridge: Tubular bridge design, stress relieved and precision machined Electrical and Plumbing Requirements: Electrical power at machine: 240 volt (+/- 10%), 3 phase, 60 Hz, 30 amps required Air at machine: 8 SCFM volume, 100 PSI pressure free of oil, water and grit larger than 25 micron (3/8î I.D. air line) Water supply at machine: 5 GPM, 50 PSI, filtered to 5 micron (1/2î I.D. water line with clean, fresh water) Capabilities: A variety of convex edges (3/8î to 6î thick) and flat edges (3/8î to 4î thick) can be shaped and polished A variety of concave edges can be shaped Ogee edges can be shaped and polished Shaping and polishing length: 1í to 12í long Profile shaping and polishing thickness from 3/8î to 6î (spindle adjustment required on stone over 2-1/2î thick, must bevel corners on stone over 3î thick) Radius capacity: 0î to 3î radius All way rubber pop-up roller system allows work pieces to be loaded and positioned easily without scratching or breaking The top line can be controlled on all types of stone to achieve the profile blend that suits your needs Bullnose edges, including laminates, are back gauged and polished, even past the bottom transition line Uniform edges on each individual job An 80% reduction in labor cost on lineal footage can be achieved Unmatched setup time Eliminates double-cutting of laminations Compared to hand tools, abrasives cost per linear foot may be reduced by as much as 60% Weight: 15,000 lbs. Overall dimensions: 19í-2îL x 6îW x 8í-6îH Floor space requirements: 23íL x 13íW x 8í6îH Specifications are per the manufacturer's web site and may differ for this 2004 model. Accuracy of these specifications cannot be guaranteed and need to be viewed as a guideline only.
|
Air Compressors
Block Stone Profiling Machinery
Machines
