|
The following specifications and control features are taken from the manufacturer's web site for a 2011 model and cannot be guaranteed to be accurate for a 2002 model. this has been upgraded to Yukon2 controller also newer laser Maximum sawing depth with diamond blades designed for granite: 2-1/4" with 14" blade, 3-1/4" with 16" blade, 6-3/4" with 24" blade Maximum tool width: 1-1/2" Blade housing built to accept 24" blade (maximum) Blade center hole to fit a 50mm arbor shaft Blade mounted on left side of bridge as viewed by operator Blade flange size: 8-1/2" Main motor size: 20 HP AC, 1150 RPM across the line starters, TEFC motor Main drive system: Direct drive Bridge miter with portable digital angle indicator (accurate to 0.1 degree): 0-47 degree manual position and lock Track type wire/hose distribution system for cross-head travel Cross-head travel distance: 144" travel provides 136" plunge cut in 4 cm (1-1/2") thick material with 14" blade Cross-head travel speed: 1-50 FPM, variable-speed AC drive, TEFC motor Cross-head travel drive: Rack & pinion Cross-head travel guides: Dual round linear ways with precision slide bearings and automatic oil system Raise and lower: 12"
|
Air Compressors
Block Stone Profiling Machinery
Machines
