CNC Bridge Saw
567/105P Bridge Saw
With 559 Rotary Table
Manufacturer: Burkhardt GmbH, Germany
2004 manufacture installed new
25,381 operating hours
This machine has been in a heated building its entire operation, never exposed to the elements.
4 hours of operation training is available at our site.
Operational Manual, Electrical Diagrams are included.
5 axis (x (bridge), y (direction of cut), z (up/down), blade (tilt to 105 degrees from vertical), c (table))
Dual lasers (vertical spot & cut alignment) for cut/piece alignment
Suited for unattended operation multiple/overnight shift
Suited for 2nd table with extended rail to enable higher production (rail extension & table not included)
480 V/ 3 phase, 60 Hz power
Pendant for cut set-up
Requires water supply (50 l/min @ 4 bar) and compressed air (0.1 l/min @ 6 bar)
Spindle Motor 50 hp
Weight 4.4 tons
STi3 - 2010 - Software for profiling/milling of custom shapes from dxf files for machine code/programs
Hardwire access/connection to PC at control station for file transfer, etc.
Suitable for simple cuts through radius mill shapes including caps
Foot print (top/width/length outside of foundation)
X 17' 2 3/4"
Y- 23' 8 3/4"
Z- 7' 7 1/8"
Z- 15' 9" to top of machine as installed
Foundation drawings as supplied by manufacturer and prepared by USA structural engineer available
Includes operating manuals, wiring diagrams
2- 1175 mm core dia (1- SS, 1 Granite)
1- 890 mm core dia (SS/Granite)
2 -880 mm core dia
1 -690 mm core dia
4 -590 mm core dia (SS/Granite)
1 -490 mm core dia (SS/Granite)
2 -500 mm core dia milling wheels @ 35 mm wide
Note: core diameter is approximate +/-2mm; all blades have diamond segments with various degree of life remaining from 100% to approximately 20%
Parts included: 6FC5410-0AY03-0AA1 R Seimens CPU
Terms cash, as is/where is/no warranties condition with removal/disassembly at plant location; power is on the machine and it is in operating condition. This machine is available for inspection and purchase now.
There is a 25 ton overhead crane available for disassembly and loading.