Automatic Slab Grinding/Polishing Machine
Manufacturer Eisenwerk Hensel Bayreuth (Burkhardt GmbH)
Year manufactured 1999
Hour Meter 7183
This machine has been in a heated building its entire operation, never exposed to the elements.
4 hours of operation training is available at our site.
Operational Manual, Electrical Diagrams are included.
Single head with automatic head change from a 11 position magazine
Power supply 480 V, 3 phase, 60 Hz; grinding motor is 28 Hp
Water 15 l/min at 4 bar
Compressed air 5 l/min at 6 bar
Control system by Siemens
Maximum piece thickness 10 inches
Minimum piece thickness 2 cm
Polishing area (length) 48'
Polishing area (width) X 12' 1 5/8"
Grinding heads 4 bricks oscillating type Model 524/320-VA 7 each in magazine
Other grinding heads 1 Frankfurt type
Adaptor for bush hammer tool on the Frankfurt grinding head
Footprint of machine
Polishing bed including magazine 65' of rail
Width 17' 9"
Parts/Etc included in sale:
Spray lube for rail Spray lube for rack
Tooth ring for the top of head
Rebuild head parts, misc. seals, bearings
Grinding Bricks (140-170 mm lengths) included:
1st Head Diamond/metal matrix 2.5 sets 20-40%
2nd Head - 120 diamonds
3rd Head 220 diamonds 4th Head - 400 diamonds
5th Head 800 diamonds 6th Head 1200 diamonds
7th Head Buffing
Brushes grits included: 35, 46, 120, 220, 400, 800
Magnasite Bricks included: 200, 600, 1000
Terms cash, as is/where is/no warranties condition with removal/disassembly by buyer at plant location; power is on the machine and it is in operating condition. This machine is available for inspection. The machine will be available for disassembly after April 4, 2016.
There is a 25 ton overhead crane available for disassembly and loading.