70 H.P. Schutte Baffalo mill and regrind model RC-2232 Hammer mill.
-Cultured marble was the material ground up in the mill
-The max material size is anything that can fit in the hopper
-The hopper size is around 64"x28" Length and width at the mouth and tapers to around 22x 32
-It has interchangeable grates to produce specific particle sizing.
- Max output per hour or day. This really depends on material being ground. We averaged in an 8 hour shift filling 6 supersacks with ground marble and granite.
- Approx. 2500 hours on the machine
-The width of the Tungsten carbide hammers is 3" and the mill uses them in rows of 6. currently in the mill is 12 installed with an extra 8 on the side
- Voltage motor hook up run at Lv 230/460 Hv
- it is mounted on a structural steel sub-base. And the overall size for shipping breaks down with a foot print at 80x 46 that sits on a steel base so over all height is around 10 feet
It is currently under power for a demonstration