Have Questions About A Machine?
Call Bron (541) 892-8555
Email: BronHenry@FastMail.com
    Home | 3/28/24 6:19 PM
 
 
 


NOTE: This Machine is SOLD. Click Here to View Our Full Selection of Used Machinery - Stone Machinery - Edge Polishing Machines Machines or Contact Us If You Are Interested in a Similar Machine.
Machine ID 3987 Year 2006
Category Used Machinery - Stone Machinery - Edge Polishing Machines Condition Reposessed
Type C-Arm Single Head Profile Edge Polishing Machine Region Southwest US
Manufacturer Park Industries    
Model Pro-Edge IV    
Photo Slideshow
Description The new Pro-Edge IV combines superior performance and productivity with state-of-the-art computerized controls to produce more finished linear feet of material per hour than manual methods. Demanding projects and the hardest materials are edged, polished and finished fast. And now with a control panel that features Spanish-language controls and advanced diagnostic screens, the Pro-EdgeÆ IV is even more productive and user-friendly.

The Pro-EdgeÆ IV shapes and polishes a variety of convex edges from 3/8" to 6" thick and flat edges from 3/8" to 4" thick and up to 12' long. In addition, concave and ogee edges can be shaped and polished. The advanced control panel guides the operator through automatic steps and up to 70 programmable, repeatable edge profiles. When complete, the fabricated pieces are held to the work surface tightly by pneumatically driven clamps and are loaded with the polished side down without scratching the surface or breaking.

Features & Benefits

Improved control unit with advanced diagnostics and Spanish-language touch-screen controls

USB Microdrive for easy updates

Streamlined design unobtrusively houses wiring in top track

70 programmable, repeatable edge profiles

Shape and polish to 12' lengths

Sets the standard for edge finish quality on almost any profile

12'L x 4'W precision-machined, rubber-matted single-unit fabricated table

Specifications

Weight: 15,000 lbs.

Overall dimensions: 19í-2îL x 6îW x 8í-6îH

Floor space requirements: 23íL x 13íW x 8í6îH

Spindle:

2/2.5 HP, 1710/3420 RPM

Pneumatic head travel with position lock (with pressure gauge and adjustment); stroke length: 2î

Center water feed

Internal air purge system

Tool adapter to accept 100mm snail lock or 5/8-11 NC connections

Shape tool adapter

Spindle Miter:

0 to 189 degree miter range

Hydraulic rack and pinion drive

Hardened alloy-steel C-arm with powder-coated finish

Rise and Fall:

3î rise and fall travel

Round rail precision guide system

Manual positioning with pointer/ruler display

Cross Travel:

Hydraulic, 15-100 FPM variable speed

Heavy-duty rack and pinion drive system

Cross travel carried on two chrome hardened steel rails with slide bearings, automatically lubricated

Table and Clamping:

12íL x 4íW precision-machined tabletop work area with rubber matted surface

Pneumatic, pop-up, ìall wayî rollers to assist in positioning, loading and unloading stone (2,500 lbs. total lifting capacity)

Five adjustable, pneumatic hold downs with aluminum extension bars

Built-in storage for aluminum extension bars

Adjustable PARK bench to support long pieces

Construction:

Table: Heavy-duty structural steel/plate construction, stress relieved and precision machined

Bridge: Tubular bridge design, stress relieved and precision machined

Electrical and Plumbing Requirements:

Electrical power at machine: 240 volt (+/- 10%), 3 phase, 60 Hz, 30 amps required

Air at machine: 8 SCFM volume, 100 PSI pressure free of oil, water and grit larger than 25 micron (3/8î I.D. air line)

Water supply at machine: 5 GPM, 50 PSI, filtered to 5 micron (1/2î I.D. water line with clean, fresh water)

Capabilities:

A variety of convex edges (3/8î to 6î thick) and flat edges (3/8î to 4î thick) can be shaped and polished

A variety of concave edges can be shaped

Ogee edges can be shaped and polished

Shaping and polishing length: 1í to 12í long

Profile shaping and polishing thickness from 3/8î to 6î (spindle adjustment required on stone over 2-1/2î thick, must bevel corners on stone over 3î thick)

Radius capacity: 0î to 3î radius

ìAll wayî rubber pop-up roller system allows work pieces to be loaded and positioned easily without scratching or breaking

The top line can be controlled on all types of stone to achieve the profile blend that suits your needs

Bullnose edges, including laminates, are back gauged and polished, even past the bottom transition line

Uniform edges on each individual job

An 80% reduction in labor cost on lineal footage can be achieved

Unmatched setup time

Eliminates double-cutting of laminations

Compared to hand tools, abrasives cost per linear foot may be reduced by as much as 60%

All descriptions were taken from the manufacturers web site of a current Pro Edge IV model and cannot be guaranteed for this 2006 model.


Dealer/Seller Contact Information
Contact Bron Henry, Product Manager
Company Selective Machinery, Inc.
Address 17434 Palamino Lake Dr
Dade City Florida 33523
US
Phone (541) 892-8555
Email bronhenry@fastmail.com

Related Machines (Used Machinery - Stone Machinery - Edge Polishing Machines)
 
(4463) 2012 Park Industries - Fastback -   (4453) 2020 StoneProTech - SPT-03 - Multi Head Inline Polishing Machine
 
(4452) N/A Farness - Mitre Plus -   (4451) 2015 Sasso - FF -
 
(4450) 2015 Sasso - FF -   (4449) n/a Montresor - Luna 740 -
 
(4412) 2003 Montresor - LARA 60 S2 - Multi-head Polishing Machine   (4400) 2017 Edgemate - Edgemate 100 -
 
(4377) 2015 Park Industries - Velocity - Multi-Head Inline Edge Polishing Machine   (4363) 2018 FERRARI & CIGARINI - MLC/6 - EDGE POLISHING MACHINE -