This Edge Machine does it all! Full Bullnose, Half Bullnose, Bevel, and Flat Polish up to 4" Thick Edges!
MACHINE WAS RECONDITIONED IN DECEMBER OF 2016!
6-Head Profile and Straight Edge Polishing Machine.
Comes with one 5" diamond shaping wheel and 10 sets of 6" diameter synthetic polishing wheels
Material is stationary and oscillating polishing carriage with all polishing heads moves left to right and reverse to finish the edge.
This most unique concept saves space over a conventional inline edge polishing machine as the foot print of the machine is all the space you need.
For a conventional inline edge polishing machine you will need to add twice the material length for your required foot print.
On the other hand this Universal 6 speeds up the polishing process over a single head C-arm edge polishing by a factor of 6-10 times, since no manual tool exchanges are required and the polishing process is completed in one pass.
Minimum 10mm (3/8") up to 80mm (3-1/8") maximum material thickness
Min. part length of 18" up to 10-1/2" maximum
Min. part width of 12" to no maximum
Narrower back splash profiles < 12" can be accomplished via a backsplash jig
Capable also of smoothing underside of edge up to 3"-4" deep.
Feed speed: Bullnose speed is approximately 1 linear foot/3 min. Eased Edge speed is approximately 2 linear feet to 3 linear feet/ min. depending on material and size of radius.
Profiles with oscillation: Full bullnose, Demi Bull, Half-Bull, Bevel, Double Bevel, Eased edges all shaped and polished
Profiles without oscillation: Such as Roman ogee, waterfall or triple pencil profile etc.
Capable of using CNC profiles and therefore being the only edge machine to perform Ogee Polished
Easy to Program
Total Machine Power 18 kw
Coolant water consumption: 15-20 gallons/min clean water(not mixable with recycled bridge saw water)
Air requirements: 125 PSI 12 CFM
Machine Size : 20'x6'x6,
Weight approx. 10,000 Lbs.