Have Questions About A Machine?
Call Bron (541) 892-8555
Email: Bron@StoneMachineryLocator.com
Backup: Call Michael (704) 281-3260
Email: Sales@StoneMachineryLocator.com
    Home | 6/25/17 2:53 PM
 
 
 


Machine ID 3743 Year 2005
Category Used Machinery - Stone Machinery - Edge Polishing Machines Condition Good
Type Multi Head Inline Profile and polishing machine Region Midwest US
Manufacturer Comandulli Sale Price $69900.00
Model Omega 100    
Photo Slideshow
Description Working hours: ~825 hours

Machine year: 2005

Tools (in order of workpiece flow):

1 calibrating head that will either:

Square up the edge of the part or

Square up the bottom edge of the part

Lower 45 degree beveling diamond tool to remove excess material

Upper 45 degree beveling diamond tool to remove excess material to prep for shaping

1 oscillating head (current a diamond tool but can be a polishing head) that creates the shape of the edge. We only use this on bullnose edges and on edges with a radius larger than 5 mm.

7 polishing heads that put the polish on the edge. The pressure of these can be adjusted to fine tune the edge dimensions and is typically determined at set up.

2 lower beveling polishing heads

2 upper beveling polishing heads

1 dripcut blade

Edge types:

The machine can do multiple thicknesses from 12-100 mm. Some common edge types that we create and polish

3 mm top and bottom

0.5-1.0 mm bevel on top and bottom

3mm top and 0.5-1.0mm bevel on bottom

bullnose

12 mm radius on top and bottom

Others include:

Any radius top and bottom

Sharknose essentially a large radius that connects to a smaller one

Half bullnose

Flat polish

I am sure that there may be a few more that can be found on the Comandulli website.

The saved programs:

Ihave been told that hundreds of Programs can be stored on the machine to make a quick selection to change between edge types.

History of our machine:

- We had originally purchased a brand new one from Comandulli, however it wasnt going to be delivered until mid-September and we needed one for the summer.

We found this used one for sale so we bought it solely to help with last summers production until our new machine came in during the fall. (We put on roughly 200-250 hrs on it.)

Comandulli did the install and audited the machine. A few items that needed replaced included a solenoid valve, a few vertical rollers, and a door catch.

- Previous owner had bought the machine brand new but put very few hours on it (around 6000. We knew about the solenoid valve issue in advance and took care of it.

Power: 480V

Air: 6-8 bar at 250 L/min

Water: Consumes 180 L/min when all ports are opened

Oil: 300 L of Hydraulic fluid


Dealer/Seller Contact Information
Contact Bron Henry, Product Manager
Company Selective Machinery, Inc.
Address 178 Leona Lane
Troutman NC 28166
US
Phone (541) 892-8555
Email Bron@StoneMachineryLocator.com


Related Machines (Used Machinery - Stone Machinery - Edge Polishing Machines)
 
(3781) 2013 Comandulli - Omega 100 - Multi Head Edge Profile Polishing Machine   (3778) 2009 Scandinvent - Edgetec 3500 - Profile Edge Polishing Machine w/8-Position Tool Changer
 
(3773) 2016 RYE CORP - IEC 60034-1 -   (3764) 2005 Sasso - TE Experience - Multi-Head Inline Edge Polishing Machine
 
(3755) 2015 Sasso - Flying Flat - Flat Edge Multi Head Polisher   (3752) 2006 Montresor - Lola 400 -
 
(3751) 2003 Park Industries - Pro Edge III - Single Head Inline Profile Polishing Machine   (3748) 2002 Park Industries - Pro Edge III - Single Head Inline Profile Polishing Machine
 
(3744) 2005 Sasso - Flying Flat Edge Polisher - Flat Edge Multi Head Polisher