Have Questions About A Machine?
Call Bron (541) 892-8555
Email: Bron@StoneML.com
Backup: Call Michael (704) 281-3260
Email: Sales@StoneMachineryLocator.com
    Home | 12/11/17 2:00 PM
 
 
 


NOTE: This Machine is SOLD. Click Here to View Our Full Selection of Used Machinery - Stone Machinery - Edge Polishing Machines Machines or Contact Us If You Are Interested in a Similar Machine.
Machine ID 3825 Year 2004
Category Used Machinery - Stone Machinery - Edge Polishing Machines Condition Currently in use
Type Single Head Profile and Polishing Machine Region West Coast US
Manufacturer Park Industries    
Model Pro Edge III    
Photo Slideshow
Description I have current Running Videos

Machine is used fully functional

Pneumatic head travel with position lock (with pressure gauge and adjustment); stroke length: 2ft

Center water feed

Internal air purge system

Tool adapter to accept 100mm snail lock or 5/8-11 NC connections

Shape tool adapter

Spindle Miter:

0 to 189 degree miter range

Hydraulic rack and pinion drive

Hardened alloy-steel C-arm with powder-coated finish

Rise and Fall:

3 rise and fall travel

Round rail precision guide system

Manual positioning with pointer/ruler display

Cross Travel:

Hydraulic, 15-100 FPM variable speed

Heavy-duty rack and pinion drive system

Cross travel carried on two chrome hardened steel rails with slide bearings, automatically lubricated

Table and Clamping:

12L x 4W precision-machined tabletop work area with rubber matted surface

Pneumatic, pop-up, all way rollers to assist in positioning, loading and unloading stone (2,500 lbs. total lifting capacity)

Five adjustable, pneumatic hold downs with aluminum extension bars

Built-in storage for aluminum extension bars

Adjustable PARK bench to support long pieces

Construction:

Table: Heavy-duty structural steel/plate construction, stress relieved and precision machined

Bridge: Tubular bridge design, stress relieved and precision machined

Electrical and Plumbing Requirements:

Electrical power at machine: 240 volt (+/- 10%), 3 phase, 60 Hz, 30 amps required

Air at machine: 8 SCFM volume, 100 PSI pressure free of oil, water and grit larger than 25 micron (3/8 I.D. air line)

Water supply at machine: 5 GPM, 50 PSI, filtered to 5 micron (1/2 I.D. water line with clean, fresh water)

Capabilities:

A variety of convex edges (3/8 to 6 thick) and flat edges (3/8 to 4 thick) can be shaped and polished

A variety of concave edges can be shaped

Ogee edges can be shaped and polished

Shaping and polishing length: 1 to 12 long

Profile shaping and polishing thickness from 3/8 to 6 (spindle adjustment required on stone over 2-1/2 thick, must bevel corners on stone over 3 thick)

Radius capacity: 0 to 3 radius

All way rubber pop-up roller system allows work pieces to be loaded and positioned easily without scratching or breaking

The top line can be controlled on all types of stone to achieve the profile blend that suits your needs

Bullnose edges, including laminates, are back gauged and polished, even past the bottom transition line

Uniform edges on each individual job

An 80% reduction in labor cost on lineal footage can be achieved

Unmatched setup time

Eliminates double-cutting of laminations

Compared to hand tools, abrasives cost per linear foot may be reduced by as much as 60%

Weight: 15,000 lbs.

Overall dimensions: 19-2L x 6W x 8-6H

Floor space requirements: 23L x 13W x 86H

Specifications are per the manufacturer's web site and may differ for this 2004 model. Accuracy of these specifications cannot be guaranteed and need to be viewed as a guideline only.


Dealer/Seller Contact Information
Contact Bron Henry, Product Manager
Company Selective Machinery, Inc.
Address 6264 Kurt Street
Brooksville Florida 34604
US
Phone (541) 892-8555
Email bron@stoneml.com

Related Machines (Used Machinery - Stone Machinery - Edge Polishing Machines)
 
(3856) 2001 Park Industries - Pro Edge III - Edge Polishing & Profiling Machine   (3847) 2013 Park Industries - Pro-Edge IV - Edge Polishing & Profiling Machine
 
(3846) 2001 Park Industries - Pro-edge III - Single Head Profile and Polishing Machine   (3834) 2006 tecnombm - Edge Master -
 
(3820) 1998 Comandully - Speedy -   (3819) 90 JMM - 90 ROUGTHER -
 
(3818) 1990 JMM - 01018ES3ESA - Edge Polishing Machines   (3804) 2002 Park Industries - Pro Edge II - Single Head Polishing Machine
 
(3796) 2006 Denver - Quasar Tech - Edge Profile And Polishing Machine